Seco's #2072-Series 303 stainless steel adapters are the perfect link between your GPS antenna and mast for your network antenna solution.
- Adapters have 3.20-inch (8.19 cm) diameters and overall heights of 3.036 inches (7.71 cm)
- Includes a removable brass 5/8 x 11 male stud that is adjustable in azimuth and held in location by two set screws
- Adapters are leveled by three screws with an adjustable tilt range +/- 7°
- The height above the pivot point to the stud shoulder is 1.37 inches (3.50 cm)
- The height below the brass 5/8 stud to the shoulder is 0.463 inches (1.18 cm)
- The axis height is engraved on the outside of the monuments
- Leveling a stainless steel monument monument adapter is simple with a 40-minute Vial Assembly (#2072-050): attach, level, rotate 180° to check calibration (sold separately)
- Adapter Weights
- #2072-30 5.50 lb (2.50 kg)
- #2072-31 6.80 lb (3.08 kg)
- #2072-32 6.83 lb (3.10 kg)
- #2072-33 6.32 lb (2.87 kg)
